More putty work and a Dungeon Saga figure

So the putty work continued this week.

All ready for primer

Up first was the wing claw of the GW LotR Balrog.  This had been snapped off at some stage.  First up I drilled and glued in a paper clip shaped the rough curve of the other claw and then covered it in Milliput.  Once dry I carved this down to match the existing claw.  After that I sanded the Milliput with 320 and then 600 grit sand paper to smooth out the surface as the existing plastic claw is very smooth of course.

Redone claw

I then dropped the figure and chipped off the end of the claw.  So I switched to green stuff as it is more flexible and redid the tip of the claw (unfortunately not as sharp) and added in some more knuckle shapes, etc.  Calling it done at this stage.

Final thing was drilling and pinning the feet for attaching to the base.

Two joins only - take that Balrog

I also did a bit of green stuff work on some Reaper Bones figures I purchased to cover up the join marks.  Nothing major there.

I had planned to start priming all these figures but the weather has been too wet whenever I'm at home and the shed does get a bit cold and humid so decided to wait a bit.

Dungeon Saga figure

Finally actually did some painting and worked on the Kickstarter exclusive figure from the Dungeon Saga kickstarter.  Kind of need a small figure to get back into things after near two months with very little painting.

Milliput is my friend - GW Balrog work

Feed me hobbits!

This week went to town with the milliput on the GW LotR Balrog figure.  So much milliput.  Part of this was because the figure had been broken apart and bits had been snapped off, especially around the wings.  Part was because of the usual GW approach to cutting up figures for the molds.  No hidden joins under overhanging sculpted details to make things clean.  Nope, been spoilt there with new resin figures.  Just the good old 'slice off the pieces' and let the buyers fix up the joins.

Wings after glue

I pinned (using chopped up paper clips) and superglued (with Zap-a-gap) all the pieces together.  The arms were the easiest as they had sockets.  The wings originally did but the inserts had been snapped off and were still in the figure.   So drilling and pinning there.  The back flames had tabs so they didn't need pinning.  The head had nothing, just a smooth join so pinning was a must there.

Wings after putty work

...and some more putty

Original base glued inside the new resin base, pre milliput

For the base the figure came with a 60mm flat base, totally different from the usual GW lipped bases. So I went off to The Combat Company and got a 60mm resin base.  I glued in the plastic base inside to add some bulk and used more milliput to hid the edge gap.

Love this barn

I also put together the Renedra barn and have now glued this onto a piece of 3mm mdf.

Reaper Fire Giant

Finally I put together the Reaper Fire Giant.  Only one tiny seam line to fill in on this one :)